SSP-180 Skid Steer Firewood Processors/Log Splitter


  • Minimum 15.5 GPM flow Rate Required
  • Minimum 2850 PSI Required
  • Case Drain is Required
  • Length:  83"
  • Width: 32"
  • Weight: 1,600 lbs.
  • Max Firewood Length: up to 22"
  • Max Diameter: 18"
  • Max Log Length: Tree Length
  • Min Log Length: 24"
  • Bent Axis, Piston Type Saw Motor
  • .404 Harvester Bar & Chain w/ Auto Oiler
  • 4" Splitter Cylinder w/ 37,680 lbs force @ 3,000 PSI
  • Powder Coated Frame & Components
  • Wear material on splitter slide
  • Includes "Connect Under Pressure" Hydraulic Couplers
  • Universal Wiring Harness
  • Patent Pending
The Hammerhead SSP-180 Pro firewood processor is the latest addition to our line of firewood processing attachments for skid steers, wheel loaders, and excavators.  An improvement over old style processors, the SSP-180 Pro can pick up a log from most any angle, including from the end of the log.  The ability to process any length log from 24", to tree length, makes the SSP-180 Pro the most versatile skid steer firewood processor on the market.  The SSP-180 Pro makes extensive use of high strength steel and incorporates industrial grade components to ensure excellent availability and a long service life.  Our unique, patent pending shuttle grapple system loads, advances & holds the log while being cut by the integrated hydraulic chainsaw.  Designed for easy operation, the SSP-180 Pro is controlled by eight push buttons attached to the skid steers joysticks and features auto retract on the saw and splitter.  The standard hydraulically adjustable 4-way splitter (6-way splitter optional), enable the operator to produce uniformly sized firewood from a variety of log sizes up to 18" diameter, all while seated in the cab of your skid steer, loader or excavator.

How is the SSP-180 Different Than Other Skid Steer Firewood Processors?
  • Process logs from 24" to tree length without having to pre-cut them
  • Process long logs from butt to top without making several trips from the log pile to the firewood pile which saves a lot of wear and tear on your skid steer or tractor & less bouncing around for you!
  • Pick up logs anywhere without having to push up against another object or log pile
  • Pick up logs from many angles vs having to line up directly with the log to be loaded
  • Shuttle grapple allows you to run crooked logs better than chain feed or sliding trough
  • Compact design makes it easy to transport while connected to a skid steer
  • Work low to the ground without having to lift the processor way up in the air to load logs
  • When splitting small diameter logs, you can load the splitting chamber with several blocks before pushing them through the splitter, no need to run the splitter each time a small block drops into the splitting chamber
  • Hydraulic splitting wedge allows you to split blocks into even size pieces
  • Load, cut & split multiple small logs
  • Use as a grapple to move logs around the yard or landing
View Our 2021 Trade Show Calendar
Picking Up A Log
Picking Up A Log
Hydraulic Connections
Shuttle Grapple Loads
& Advances Log
Hydraulic Adjustable
Splitting Wedge
Processor
​Controls
Videos below show our prototype firewood processor with a new operator.  Videos have been edited due to new operator learning curve.  Please note that production machines will be built to run faster & more efficient than this prototype.

Hammerhead Attachments Is Your Best Source For Firewood Or Log Handling Skid Steer Attachments